Bioprinting: An Overview

Bioprinting is a method for constructing living tissues through three-dimensional (3D) printing of cells.

Credit: Spectral-Design/Shutterstock.com

Bioprinters produce tissues layer-by-layer, as a 3D printer does for plastic and metal materials, with a printhead head moving in all directions to place cells where they are needed.

One of the earliest bioprinters was developed by Makoto Nakamura. He noticed that standard inkjet printers output droplets of ink which are roughly the same size as human cells.

Makoto adapted inkjet technology to create a functioning bioprinter in 2008 that printed an artificial blood vessel. He used an alginate hydrogel with a nozzle from a commercial inkjet printer mixed with a substrate made from a calcium chloride solution.

Although modeled on conventional 3D printing, bioprinting is vastly more complex. Recreating tissues and organs also requires the recreation of structures and functions within the tissue, including signaling networks, cellular interactions, multiple cell types, and physiological activity.

Conventional tissue engineering approaches typically use some sort of fabricated 3D scaffold to build up the 3D cell structure. However, those approaches are not able to reproduce complex inner structures of the tissues.

Bioprinting has an advantage in that its additive approach allows reproduction of fine 3D structures within the tissue with precise control of the positioning of cells.

Bioinks

3D printers have typically used non-biocompatible inks, often containing toxic organic solvents or made under harsh environmental conditions. Development of biocompatible inks has been one of the first challenges to overcome in bioprinting. A four-level classification system has been proposed for 3D printer inks. The categories are as follows:

  • Level 1: ink for printing nonbiocompatible materials such as a 3D model based on CT scan data
  • Level 2: ink for printing with biocompatible materials such as on-demand 3D prostheses
  • Level 3: ink for tissue engineering for biodegradable materials
  • Level 4: ink for tissue engineering biologically relevant materials using components such as living cells and extracellular matrices

An ideal bioink for organ fabrication should have two main qualities. First, it should have optimal physicochemical properties. Second, it should be cytocompatible and able to reciprocate cell-mediated matrix remodeling during growth, maturation, and regeneration of tissue.

Other qualities that should be considered in a bioink include viscosity, viscoelasticity, gelation kinetics, hydration, and biodegradation. Real raw materials such as extracellular matrix, biomolecules, and live cells are optimal for bioprinting.

Bioprinting technologies

A number of different technologies have been developed to enable bioprinting.

Jetting-based bioprinting

This type of bioprinting resembles an inkjet printer. Structures are created through layering of bioink droplets on a substrate. Droplets can be generated through a thermal technique, by a piezoelectric actuator, through the use of a laser, or by pneumatic pressure.

Jetting-based bioprinting techniques have good resolution, but can be slow. It is also not a good technique to use with high viscosity materials, since they would not form the necessary picoliter volumen droplets.

Extrusion-based bioprinting

In an extrusion-based system, continuous filaments of a hydrogel mixture are dispensed to fabricate the structure. This method can accommodate a wider variety of materials than jetting-based bioprinting.

Integrated bioprinting

Some hybrid bioprinting technologies combine a synthetic biopolymer with a cell-containing hydrogel to create tissue constructs with higher mechanical strength. The synthetic portion of the material lends support to 3D structures.

Scientists Use 3D Printer and Living "Ink" to Create Body Parts

Further Reading

Last Updated: Feb 26, 2019

Dr. Catherine Shaffer

Written by

Dr. Catherine Shaffer

Catherine Shaffer is a freelance science and health writer from Michigan. She has written for a wide variety of trade and consumer publications on life sciences topics, particularly in the area of drug discovery and development. She holds a Ph.D. in Biological Chemistry and began her career as a laboratory researcher before transitioning to science writing. She also writes and publishes fiction, and in her free time enjoys yoga, biking, and taking care of her pets.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Shaffer, Catherine. (2019, February 26). Bioprinting: An Overview. News-Medical. Retrieved on June 01, 2023 from https://www.news-medical.net/life-sciences/Bioprinting-An-Overview.aspx.

  • MLA

    Shaffer, Catherine. "Bioprinting: An Overview". News-Medical. 01 June 2023. <https://www.news-medical.net/life-sciences/Bioprinting-An-Overview.aspx>.

  • Chicago

    Shaffer, Catherine. "Bioprinting: An Overview". News-Medical. https://www.news-medical.net/life-sciences/Bioprinting-An-Overview.aspx. (accessed June 01, 2023).

  • Harvard

    Shaffer, Catherine. 2019. Bioprinting: An Overview. News-Medical, viewed 01 June 2023, https://www.news-medical.net/life-sciences/Bioprinting-An-Overview.aspx.

Comments

The opinions expressed here are the views of the writer and do not necessarily reflect the views and opinions of News Medical.
Post a new comment
Post
You might also like...
Researchers develop new bandage treatment to treat diabetic foot ulcers